Step 2: use "recover_mp4_to_h264.exe" to create a new mp4 file from the damaged one, using the reference file's avcc you just created in step 1. Step 3: use mp4muxer.exe to create an mp4 from the newly created h264 you created in step 2. voila!~. It's sounds like a hot mess of stuff to do, but it truly is simple.
On my phantom 2 vision + I cannot get the app to show the camera view on my iPhone. I've upgraded firmware, done multiple suggested trouble shooting steps, but still get no view through the app to my phone. The camera will take shots and video, but I am having to guess at what the camera is "seeing" without the view appearing through the app.
Step Two – Mount the Filter Board Retrofit. At the time of this writing, the Zenmuse H3-3D gimbal ships with a small filter circuit board that is designed to remove interference from the video feed from the gimbal used for FPV. This seems to be a retrofit from DJI. Locate the Two Screws on the main board of your Phantom 2 indicated with red
This is not a complicated procedure, as the Zenmuse gimbals were designed to be easy to install. There are 3 gimbal models that you can choose from. The Zenmuse H3-2D is the most basic option, and is compatible with the GoPro Hero 3. It has a 2-axis stabilization system, and was designed to work with the DJI flight control system.
This is how I turn on my Phantom: 1.Turn on controller 2.Turn on range extender 3.Turn on Phantom 4.Calibrate Phantom This is what I do to start flying: 1.I connect my iPhone with WiFi to "Phantom" network. 2.I can receive live camera feed on iPhone so everything is good and working fine, all signals and calibration are good.
The camera is working and can take photos and video, but it won't stream it to the iphone anymore. Dec 5, 2015 by guygregory Don't call DJI they had me on hold an hour and half and when my call was answered the person on the other end could speak English after another hour I was told I needed to set up a different email and password
Try hooking up to phantom assistant and do a advanced Full IMU calibration on very level table: "Important：. If a solid red LED indicator appears, connect to the Phantom 2 Vision+ Assistant Software for details and resolution. This may be caused by: 1)IMU calibration required: Recalibrate IMU using Assistant Software.
Open the DJI Assistant 2 and wait until it connects to your DJI Phantom 4. Select DJI Phantom 4 and start the Calibration process. Tap on the button “Start Calibration” that is located on the bottom right side. Place the front side of your Phantom 4 Vision Sensors to look towards the screen.
The DJI Phantom 2 Vision+ with remote controller and DJI Vision-equipped smartphone application. The drone's 5200 mAh lithium ion battery pack. In terms of dimensions, the DJI Phantom 2 Vision+ drone can fit inside a cubic foot sans propellers. The plastic propellers themselves are 9.5 inches, but the unit still does not consume a lot of space
MaJH. f6fgmb0b7q.pages.dev/483f6fgmb0b7q.pages.dev/893f6fgmb0b7q.pages.dev/911f6fgmb0b7q.pages.dev/704f6fgmb0b7q.pages.dev/240f6fgmb0b7q.pages.dev/780f6fgmb0b7q.pages.dev/391f6fgmb0b7q.pages.dev/765f6fgmb0b7q.pages.dev/45f6fgmb0b7q.pages.dev/910f6fgmb0b7q.pages.dev/438f6fgmb0b7q.pages.dev/65f6fgmb0b7q.pages.dev/472f6fgmb0b7q.pages.dev/527f6fgmb0b7q.pages.dev/8
dji phantom 2 camera not working
